gui chao cable news: performance characteristics of water-非凡电子娱乐

the performance characteristics of water-cooled cable are as follows:

first, the electrode (also known as cable head) is non-contact, no solder joints, no weld,

processed by the whole copper in the cnc lathe, milling machine, beautiful and durable, small resistance;

two: jacket pipe, the use of high-quality hose, hydraulic pressure >0.8mpa,

breakdown voltage is higher than 4000v. another flame retardant jacket for users to select the special occasions;

three: the connection between the electrode and the outer tube, choose the 1cr18ni9ti stainless steel clip fastening, non-magnetic, no rust;

four: copper wire is fine wire in seven special winding machine layered winded. soft, small bending radius;

five: the use of seven wire water-cooled cable, power transmission efficiency is high. because each seven wire insulation,

middle and high frequency current, no surface skin effect, compared with other cross section water-cooled cable,

through the same current, less heat;

six: the water-cooled cable with seven wire wire, can improve the service life of water cooled cable.

because of the long time of water cooled cable, the working environment is very bad.

before we use copper bare water-cooled cable, when used for a period of time after the water cooled cable,

open the cable jacket, you will see the conductor surface with a layer of green patina.

then we use seven wire water-cooled cable for seven wire has seven film protective layer,

it acts as a preservative. with users, we used seven wire water-cooled cable wire manufacturing,

the service life is 1.5 ~ 2 times of bare copper;