damage and prevention of shielded cable-非凡电子娱乐

in the manufacturing process of the shielding layer, there are a lot of correct or incorrect processes. one of the most important parameters is the braid angle of the shield.

the cable is used for the towline, the shielding layer of cable diameter under load must be taken into consideration. unreasonable shielding angle can further increase the tension load, which leads to the damage of the shield layer. this will cause the shielding effect is weakened, when the sharp tail cable expose wool fabric or gold foil materials come into contact with the core wire, and even cause short circuit. here, we recommend a useful trick: if the insulation off, can easily be pushed back to the shielding layer in the sheath, but this shielding layer is not suitable for the energy supply system, the movement of the flexible cable. of course, igs is able to provide a direct solution to these problems:

the shielding layer through long-term experiment determined the braided angle can effectively offset the tension, so it is suitable for the chain.

due to the stability of the inner sheath, the shield layer will not relax the failure.

in the structure of the twisted pair, the shielding layer itself has the anti torsion property.

sheath worn or damaged

any defects in the internal structure are difficult to detect from the outside, but the problem of the sheath can be directly observed by the naked eye. the sheath is the first layer protection of the cable precise inner structure. this is why the rupture, wear and expansion of the deformation of the sheath is very serious quality problems. in order to avoid this problem, igs provides seven different materials of the cable sheath, for the user to choose according to the corresponding working environment of their machinery.

a type extrusion molding sheath

manufacturing processes and materials are also important factors in determining the quality of the product. in some of the so-called in the application of cable drag chain, usually tubular sheath type, so it is difficult to bend the long process and provide the necessary support strand structure, so that the wire structure is easy to split.

igs as the first manufacturer of towline system, thus developed an armor type extrusion sheath.

the sheath ensures that the cable is not loosened when the cable is moving. the reason is that the sheath is extruded through the special large pressure, it is like a guide groove, the core line of the movement played a guiding role, but also played a supporting role. it is very suitable for the chain.

high quality flexible cable to summarize that applies to the towline center to stress design; multi beam cable structure; the inner sheath armor type extrusion shielded cables; shielded insulation braid; optimized shielding angle; sheath armor type extrusion molding.